Maintenance of air compressor cooling system: Different maintenance for air-cooled/water-cooled models, efficient heat dissipation without temperature rise_Maintenance Services_Repair Services_【Kongyabang】Air Compressor AI Digitalization

HMM

2025-12-05 17:24:12

0order

Maintenance of air-cooled models: Cleaning: Clean the dust and cotton wool on the surface of the heat sink every 50 hours, and use a high-pressure water gun (low-pressure mode) to rinse to avoid blocking the heat dissipation channel; Fan inspection: Every 100 hours, check whether the fan blades are deformed, whether the motor is running normally, and add lubricating grease when the bearings are short of oil; Environmental requirements: Ensure that a ventilation space of at least 30cm is reserved around the equipment to avoid heat sources from approaching. Maintenance of water-cooled models: Water quality treatment: Use softened water to avoid scale deposition; Add water stabilizer every 3 months to prevent corrosion and scaling; Cooler cleaning: Disassemble the cooler every 6 months, soak it in descaling agent for cleaning (or rinse with high-pressure water), and remove the scale inside the pipes; Pipeline inspection: Check whether the cooling water inlet and outlet pipelines are unobstructed, valves and water pumps are running normally, and there is no leakage.

Air compressor cooling system Air cooling maintenance Water cooling maintenance Heat dissipation efficiency

The importance ... As the "power heart" of industrial produ...

Key maintenance... The transmission system of the belt type air compr...

Maintenance of ... The cooling system directly affects the operating ...

Complete mainte... The filter element is the "filter" of an...

The three core ... Detailed explanation of the daily cleaning, inspec...

Air compressor ... Organize the full cycle maintenance schedule for a...

Guide to Replac... Lubricating oil is the "blood" of air co...

Compressed Air ... Analyze the causes of the three most common types ...

Seasonal mainte... There are significant environmental differences in...

Maintenance of ... The aging of seals is the main cause of oil and ga...